| Customization: | Available |
|---|---|
| After-sales Service: | 12 Months |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Zinc Anodes are high quality pressure die-cast and provide effective and inexpensive protection for your boat in salt or brackish water. Two stainless steel slot-head screws with lock washer and hex nut are used to lock the anode halves around the shaft. The stainless steel hex nut is pressed into the anode body.
Zinc alloy sacrificial anodes are suitable for ships in seawater and fresh water media, ballast tanks, mechanical equipment, marine engineering and harbor facilities, drilling platforms, port terminals, seawater media condensers, water pumps and pipelines in low resistivity soil , Cable and other facilities.
1. Models and Specifications of Typical Sacrificial Anodes Used on Ship Hull
| Type |
Specification (mm) L x W x H |
Weight (Kg) |
| TH-1 | 800x140x60 | 47.0 |
| TH-2 | 800x140x50 | 39.0 |
| TH-3 | 800x140x40 | 31.0 |
| TH-4 | 600x120x50 | 25.0 |
| TH-5 | 400x120x50 | 16.0 |
| TH-6 | 500x100x40 | 13.6 |
| TH-7 | 400x100x40 | 11.0 |
| TH-8 | 300x100x40 | 7.5 |
| TH-9 | 250x100x40 | 6.5 |
| TH-10 | 180x70x40 | 3.5 |
| TH-11 | 300x150x50 double iron feet | 14.5 |
| TH-12 | 300x150x40 double iron feet | 11.5 |
| TH-13 | 300x150x50 bolt | 12.0 |
| TH-14 | 300x150x40 bolt | 9.0 |
2. Models and Specifications of Typical Sacrificial Anodes Used in Ship Ballast Tank
| Type |
Specification (mm) L x (Top Width + Bottom Width) x H |
Weight (Kg) |
| TT-1 | 500 x (115+135) x 130 | 56.0 |
| TT-2 | 1500 x (65+75) x 70 | 50.0 |
| TT-3 | 500 x (110+130) x 120 | 50.0 |
| TT-4 | 1000 x (58.5+78.5) x 68 | 33.0 |
| TT-5 | 800 x (56+74) x 65 | 25.0 |
| TT-6 | 1150 x (48+54) x 51 | 20.0 |
| TT-7 | 250 x (80+100) x 85 | 13.0 |
| TT-8 | 200 x (70+90) x 70 | 7.5 |
3. Models and Specifications of Typical Sacrificial Anodes Used for Harbor installations and Offshore Projects
| Type |
Specification (mm) L x (Top Width + Bottom Width) x H |
Weight (Kg) |
| TI-1 | 1000 x (115+135) x 130 | 115.0 |
| TI-2 | 750 x (115+135) x 130 | 85.0 |
| TI-3 | 500 x (115+135) x 130 | 56.0 |
| TI-4 | 500 x (105+135) x 100 | 40.0 |
4. Models and Specifications of Typical Tape Sacrificial Anodes Used for Seawater Cooling System
| Type |
Specification (mm) L x (Top Width + Bottom Width) x H |
Weight (Kg) |
| TE-1 | 500 x (115+135) x 130 | 56.0 |
| TE-2 | 1000 x (80+100) x 80 | 50.0 |
| TE-3 | 500 x (105+135) x 100 | 40.0 |
| TE-4 | 500 x (80+100) x 80 | 25.0 |
| TE-5 | 400 x (110+120) x 50 | 16.0 |
| TE-6 | 300 x (140+160) x 40 | 12.5 |
| TE-7 | 200 x (90+110) x 40 | 5.5 |
| TE-8 | D300x60 Round-disk | 30.0 |
| TE-9 | D360x40 | 28.5 |
| TE-10 | D300x40 | 20.0 |
| TE-11 | D200x50 | 10.5 |
| TE-12 | D180x50 | 8.5 |
| TE-13 | D120x100 | 7.5 |
5. Models and Specifications of Typical Sacrificial Anodes Used for the Inside of Storage Tanks
| Type |
Specification (mm) L x (Top Width + Bottom Width) x H |
Weight (Kg) |
| TC-1 | 750 x (115+135) x 130 | 85.0 |
| TC-2 | 500 x (115+135) x 130 | 56.0 |
| TC-3 | 500 x (105+135) x 100 | 40.0 |
| TC-4 | 300 x (105+135) x 100 | 25.0 |
6. Models and Specifications of Typical Sacrificial Anodes Used for Underground Pipelines, the Outside Bottom of Tanks and Other Underground Metallic Structures
| Type |
Specification (mm) L x (Top Width + Bottom Width) x H |
Weight (Kg) |
| TP-1 | 1000 x (78+88) x 85 | 50.0 |
| TP-2 | 1000 x (65+75) x 65 | 33.0 |
| TP-3 | 800 x (60+80) x 65 | 25.0 |
| TP-4 | 800 x (55+64) x 60 | 22.0 |
| TP-5 |
650 x (58+64) x 60 |
18.0 |
| TP-6 | 550 x (58+64) x 60 | 15.0 |
| TP-7 | 600 x (52+56) x 54 | 12.5 |
| TP-8 | 600 x (40+48) x 45 | 9.0 |
){kind=link}