Marine Forged Steel Stern Tube with CCS Certificate

• Customization: Available
• Certificates: CCS, ABS, BV, Dnv, Nk, Kr, Lr, Gl, Rina, RS, etc.
• Dimension: Designed According to The Shaft of The Vessel
• Model NO.: Stern Tube
• Processing Methods: Forged and Lathe Machining
• Machining: Rough Machining or Finish Machining
• Material of Stern Tube: Forged Steel, Carbon Steel, Alloy Steel
• Test: 100% Ultrasonic Flaw Detection Test
• Application: Ship, Boat
• OEM: Yes
• Package: Standard Export Wooden Case
• Keywords: Stern Tube
• Transport Package: Wooden Case for Stern Tube
• Specification: CCS, ABS, GL, NK, BV, LR, DNV, RINA Stern Tube
• Trademark: OEM Stern Tube
• Origin: Jiangsu Stern Tube
• Production Capacity: 50 Sets Per Month for Stern Tube

Product Description

Marine Forged Steel Stern Tube with CCS, ABS, GL, DNV, RINA, KR, BV Certificates

The stern tube is normally made of cast iron slightly larger at the forward end to ease removal. The forward end is flanged and bolted to a doubler plate stiffened aft peak bulkhead. The forward end is supplied with a stuffing box and gland, the after end with a bearing comprising lignum vitae or similar, the wood is dove tailed into a brass bush, the wood is machined and cut on end grain. Can be lined with Lignum Vitae , rubber composition (cutlass rubber) or an approved plastic material (Certain plastics possess good bearing properties being inert and very tolerant of slow speed boundary lubrication conditions. Cresylic resin bonded asbestos such as Railco WA80H give good results in condition of heavy water contamination in the lubricating oil of almost 100%)
 
There are two kinds of lubrication systems for the stern tube: water lubrication and oil lubrication.
 
For water lubricated bearing not less than 4 x the diameter of the steel shaft. If the bearing is over 380mm diameter forced water lubrication must be used, a circulating pump or other source with water flow indicator.







 

WE CAN DESIGN AND MANUFACTURE THE WHOLE PROPULSION SYSTEM, INCLUDING PROPELLER, SHAFTING, RUDDER, ETC. ACCORDING TO THE GA OF THE VESSEL.